Differences

This shows you the differences between two versions of the page.

--- install [2022/04/08 13:51] – rajit
+++ install [2025/08/30 12:54] (current) – [Troubleshooting] rajit
@@ Line 1: / Line 1: @@
 ====== Installing ACT ======
-===== Unix/Unix-like Environments =====
+Primary development of ACT is conducted on Linux and MacOS, and so it has been extensively tested on such systems. It has also been tested in certain [[install#Microsoft Windows|Windows]] environments (see below).
-Primary development of ACT is conducted on Linux and MacOS, and so it has been extensively tested on such systems.
+If you are a Homebrew user, check out the [[https://github.com/asyncvlsi/homebrew-tap|homebrew tap]] for the tools.
-==== System requirements ====
+===== Getting the source =====
+The core library is available from [[https://github.com/asyncvlsi/act|Github]].
+**Note:** This only installs the core circuit design tools. For those interested in the full flow, please use the [[https://github.com/asyncvlsi/actflow|actflow]]  [[install_actflow|repo]]. The flow repository includes the core ACT repository, and includes many additional tools including ''actsim'', ''interact'', ''chp2prs'', and ''dflowmap'' (to name a few).
+===== Linux/Unix-like environments =====
 Before starting, please make sure that your system satisfies the following requirements:
@@ Line 27: / Line 35: @@
    * Run ''./build''
-If there is an issue building the software and you want to do a clean build, use ''make realclean''
+If there is an issue building the software and you want to do a clean build, use ''make realclean'' before re-running the build instructions above.
 Once you've built the tools, run ''make install'' to install the files, and ''make runtest'' to run through a set of test cases.
@@ Line 37: / Line 45: @@
 ==== Troubleshooting ====
-If you have trouble building on your specific operating system have a peek in the continuous integration scripts of the git repository if your operating system is covered there and you can try the commands specified:
+The [[install_actflow#troubleshooting|actflow]] troubleshooting section may be helpful.
-https://github.com/asyncvlsi/act/blob/master/.circleci/config.yml
-for ''Debian'', ''Ubuntu'' look at the ubuntu 18 section
-for ''RHEL'', ''SUSE'', ''CentOS'', ''Fedora'' look at centos 8 section
@@ Line 56: / Line 58: @@
 ACT files are typically short since they are written by a designer. However, an ACT file generated by another program---especially if the program generates a flattened design---can be large. If an ACT process (or a namespace) has a very large number of instances/connections that are individually listed (i.e. in the input file) and the library crashes, try removing system limits on the stack size (using ''unlimit'' or ''ulimit'' depending on your shell) and re-running the program.
+NOTE: This issue has been fixed as of 7/10/2023.
 ===== Synopsys linkages =====
 Some of the library functionality can be linked into Synopsys ''vcs'' for co-simulation support. This requires some Synopsys header files (obviously not included in the ACT distribution).