Differences

This shows you the differences between two versions of the page.

--- config:netlist [2023/04/15 07:30]
rajit [Miscellaneous]
+++ config:netlist [2024/03/31 13:40]
rajit [Transistor device names]
@@ Line 173: / Line 173: @@
 </code>
 The default is blank, but it can be changed as necessary.
+===== Other Devices =====
+Since ''prs'' bodies can have other two-terminal devices, the string to be used in the SPICE output for the device
+can be specified as:
+<code>
+string_table device "C"
+</code>
+This says the first device in the ''prs_device'' table is a capacitor (since ''C'' is the device string used by SPICE for capacitors).
 ===== Interactions with the layout editor Magic =====
@@ Line 219: / Line 229: @@
 When production rules are automatically mapped to cells by the cell mapping pass, cell names are generated based on the production rule expressions for the pull-up and pull-down network. These names can get very long, and be difficult to read. This table is used to translate a generated name into something that is more understandable. The table should have an even number of entries that alternate between the generated name and the mapped name.
+<code>
+string cell_inport "in"
+string cell_outport "out"
+</code>
+When cells are generated, their ports are called ''in'' and ''out''. This can be changed to any port name using these configuration file options.
 ====== Sizing configuration options ======